Heavy Copper Wire Drawing Machine

1. Model of Drawing Machine:
INTERMEDIATE WIRE DRAWING MACHINE(ZL-17MDT)
2.Main technical data of Drawing Machine:
2.1 Application: process copper wire to small size
2.2 Type: four-shaft horizontal type
2.3 Size of inlet:                      φ2.1mm-φ3.2mm
2.4 Size of outlet:                     φ0.4mm-φ1.2mm
2.5 Highest machine speed:             1200m/min
2.6 Speed of Outlet wire:(only for reference)
Φ0.4-1.6mm    800-1200m/min
2.7 Max. Quantity of drawing die:        17 (prepared by buyer)
2.8 Size of drawing die:                φ30mm x 15mmT or φ25mm x 10mmT
2.9 Area reduction of wire drawing:
Die No.1-16:                      15%
Die No.17:                        10.5%
2..10 Lubrication type of wire drawing:     total soak type
2.11 Oil requirement of wire drawing:      100 liter/min
2.12 Power of main machine:             45KW
2.13 Power of coiling:                  11KW
2.14 Pay-off:                       paid off by 90W motor with utmost detecting switch
2.15 Safe door:                         lift type
3. Component of Drawing Machine:
3.1 Main machine of wire drawing         1 set
3.2 Shaftless coiling machine             1 set
3.3 Pay-off stand                       1 set
3.4 Operating desk                      1 set
3.5 Electric control cabin                 1 set
4.Content of Drawing Machine
4.1 Main machine of wire drawing
4.1.1 Cast iron incorporate casting machine.
4.1.2 Driving type: droved by gear
4.1.3 Capstan
4.1.3.1 Four tiers and two bodies
4.1.3.2 Four capstans, four capstans can be changed with same specification. Final capstan should be unaided specification
4.1.3.3 Tungsten carbide is sprayed on surface of capstan
4.1.3.4 Driving type: drove by gear
4.1.4 Oil pipe of wire drawing:
4.1.4.1 Inlet of oil pipe PT-1 1/4 with spherical valve.
4.1.4.2 Underside of die should be cooling and lubricated. When working, capstan should be dipped in liquid of wire drawing, so that it can improve cooling
4.1.5 Outgoing of wire:
4.1.5.1 Blanket seat of outgoing
4.1.5.2 Capstan of outgoing
4.1.5.3 Meter measure
4.1.6 Mechanism lubricate
4.1.6.1 Dipping circle and spray type, seller supply sprocket wheel and axletree
4.1.6.2 There is measure for capacity of oil in machine case
4.1.7 Main motor:
4.1.7.1 45KW 4P 380V 50HZ inductive motor
4.2 Shaftless coiling machine
4.2.1 Type:                          swing arm
4.2.2 Precision:
1-10KG, tension is regulated by automatic pressure regulating valve
4.2.3 Air pressure:                    4-6kg/cm
4.2.4 Motor:                        15KW, 4P 380V 50HZ inductive motor
4.2.5 Max. Loading capacity of copper:   300kg
4.2.6 Bobbin:                       φ630mm
4.2.7 Brake:                         Electromagnetic brake
4.2.8 Transmission:                   Transmission triangular strap
4.2.9 Safety cover:                   Coiling spool is close type. There is one
window for check.
4.3 Operating box
4.3.1 Zero push-button of counter
4.3.2 Emergency stop button
4.3.3 Control power ON/OFF optional switch
4.3.4 Automatic/ by hand
4.3.5 Running/stop button
4.4 ZL-57KVA type Anneal machine
4.4.1 Application:
This machine is the corollary equipment (which is optional) of ZL-17MDT.
4.4.2 Main technical data
4.4.2.1 Wire size:                     φ0.4mm-φ1.2mm
4.4.2.2 Trolley speed:                  600-1000
4.4.2.3 The way of anneal:              DC
4.4.2.4 Maximum output power:         57KVA
4.4.2.5 Maximum anneal current:        1200A
4.4.2.6 Transmission type:              gear
4.4.2.7 Dynamic source:                main engine
4.4.2.7 Maximum anneal voltage:        50V
4.5 Electrical control box
4.5.1 Power switch
4.5.2 AC Motor and transducer control system
4.5.3 Disorder line and line disconnection control
4.5.4 Coiling machine to pay off and brake control
4.5.5 Electrical parts, first line in both here and abroad