Upward Continuous Casting Machine

Shanghai Lishang International Trading Co.,Ltd., the professional continuous casting machine supplier in China, and the best continuous casting machine manufacturer in China. High quality combined with good service support after sales provide exceptional performance for Lishang's customers and business partners.
1. Upward Continuous Casting Machine System Type:
1.1 Mode: SL- IV- Q
1.2 Original Mode: SL12-IV-QE-8-S
1.3 Specification:8mm, 12 strands, QE type furnace, annual output 6000 tons
2. Upward Continuous Casting Machine Performance of copper rod:
2.1 Casting rod is made of standard cathode copper
2.1.1 Density:                                ~ 8.9kg/dm3
2.1.2 Elongation percentage                     ≥35%
2.1.3 Tensile strength                          ≥170N/MM2
2.1.4 Resistance in soft condition:                ≤ 0.01724Ω. mm2/m
(tested after processing to3mm or 2.6mm)
2.1.5 Oxygen content:                          ≤ 10PPM
2.2 Casting rod is made of bright wasted wire and cable, small copper scrap:
2.2.1 Performance of copper rod depends on raw material.
2.2.2 Resistance is not guaranteed.
2.2.3 Meet the requirements of drawing wire.
3. Upward Continuous Casting Machine Main technical data:
3.1 Rod diameter:                          8mm
3.2 Quantity of strand:                       12
3.3 Annual output:                          6000 tons/ year (1 year: 330days/7920 hours)
3.4 Voltage:                                440V 60Hz
3.5 The installed power:                      480KVA
3.6 Maximum operating power:                270--290KW
3.7 Water consumption:                      29 tons /hour (move in cycle)
3.8 One ton copper rod need:
3.8.1 Electricity:                          ≤400 KWH/T
3.8.2 Charcoal                            8~10Kg(for melting furnace and transitional chamber)
4Kg (for holding furnace).
4. The detail of Upward Continuous Casting Machine system:
4.1 Assembly furnace consist of:
4.1.1 Two melting furnaces (induction part) and one holding furnace
4.1.2 Whole cathode copper feeding, whole copper wire feeding after pressing
4.2 casting machine:
4.2.1 Four-strand type inversion casting machine
4.2.2 Drive: derived by 2 sets servo motor at two sides of mounting plate, each drive 6 radices copper rods
4.2.3 Traction device: consist of two group synchronal draw-off rollers, pressed by cylinder
4.2.4 The length of cooler: total 1370mm
4.2.5 Specification: Φ8mm copper rod
4.2.6 Simple feeding unit
4.3 coiling machine:
4.3.1 Use continuous synchronous coiling machine pressed by cylinder, droved by take-up bobbin and drive device, regulated speed by frequency conversion, automatic pay-off.
4.3.2 Effectual diameter of take-up: 1500mm
4.3.3 Coiling weight: around 2.5 tons