Casting Machine,Stranding Machine,Extrusion Machine,Drawing Machine
Total 46 Product(s)
We are professional Casting Machine,Stranding Machine,Extrusion Machine,Drawing Machine factory and supplier in China.We can produce Casting Machine,Stranding Machine,Extrusion Machine,Drawing Machine
according to your requirements.More types of Casting Machine,Stranding Machine,Extrusion Machine,Drawing Machine wanted,please contact us right now!
View: 
aluminum casting machine:
1,roll aluminum liquid into the board
2, liquid purified in according with the products demands
The continuous aluminum casting machine will roll aluminum liquid which is melt and purified in according with the products demandsiinto the board or coil material with thickness 6-1Omm
Its characteristics: Aluminum strip pass through melting and casting become molten aluminum. It can be casted into slab, then coiled. It passes through cold rolling mill to finishing. So that the aluminum ingot, heating, hot rolling, open aluminum strip are omitted in the aluminum strip production process. Greatly reducing the production process,
1. In horizontal and tandem construction, modular combination simplifying the equipment on assembly and installation.
2. Driven by double motors to realize fast die-change.
3. A helical gear transmission of high efficiency with low noise.
4. A fully immerging emulsion system to ensure an effective cooling and lubricating for wire and dies.
Specifications:Cable extrusion line apply to extrude PVC and PE for electric wire and power cable.
Wire Rope Cable Stranding Machine
This strander is for manufacturing high-carbon/low carbon/medium carbon steel wire rope used in cable/lifting /elevator/crane/ hoisting/anchor and other industries.
1.HSH series automatic vacuum film pouring boiled forming equipment for making sugar, it combine machine, electricity, gas in one, with a high degree of automation.
2.The machine output is high, production efficiency significant,
3.With high output ang good production efficiency, it can produce not only crystal candy
Specifications
continuous extrusion machine
- machinery
- engineering
Specifications
-OFC vertical continuous casting machine
-Direct manufacturer
-Supply all knids of spare parts
-Upward method
-No pollution
Benteng brand noted upward continuous casting machine/casting machine is indepentently designed by our professtional designers. This machine is used to produce oxygen free copper products.
Specifications
a) Inlet diameter DIA.:5.5mm (Max.)
b) Material :ER70S-6
c) Tensile strength: 400Mpa
Specifications
The machine is used for producing Al & Al-allay flat wire, irregular wire, Cu bus-bar or tube , flat tube,ACSR and AL clad cable
Cable Extruder Pressure
1.Cutting mode:planet cutting.
2.Compressed air pressure:0.3-0.8Mpa.
3.CE
This machine is mainly used for producing 1.35-4.0mm copper wire from 8mm copper rod and
conduct continuous annealing directly. After this, take-up is done by double reel take-up device or
coiling one.
Specifications
It's used for cabling power cable of medium&low or high voltage and milliken conductor of high or extra high voltage....
ransparant PVC pellets plastic particles plastic pellets pvc compound PVC material pvc rigid granules
transparant PVC granules for pipe fitting, Rigid pvc compounds for injection, PVC raw material
We are able to manufacture all kinds of PVC granules, rigid, soft, clear for different usage, such as PVC profile, PVC frame and pipe raw material. Wi
To produce copper or aluminium strands and ACSR of large cross section at long length without backtwist; also for pretwisting and compressing sector conductor and divided one.
Adopting a centralized load or unload system with a pneumatic clamp to realize high efficiency.
Adopting a constant tension pay-off with air pressure damp for each bobbin t
Rigid Stranding Machine/Strander:used for stranding and compacting of sector copper, aluminum conductor and round conductor;
Rigid Stranding Machine/Strander
used for stranding and compacting of sector copper, aluminum conductor and round conductor; pre-twisting and compacting Milliken conductor; taping high-voltage conductor.
Specifications
Rod break down machine
a. Diameter of supply wire: 8 mm
b. Diameter of finished wire:3.2-1.2mm
c.Quick change type for dies.
he machine is mainly used in extruding soft and hard thermoplastics,such as polyviyl chloride(PVC),polyethylene and others.It is used with relevant auxiliary machine (including shaping machine head)to produce several kinds of plastic products,for example:film,pipe,rod,plate,thread,cable insulating layer,hollow product.It is also used ofr prilling.
wire drawing machine
Main parameter of low carbon steel wire processing line
Wire pretreatment line
(1)up-draft type pay-off stand .steel weld-ment structure, and the staircase, safety fence is 5.5 meters high, with disorderly wire alarm parking device, the disorderly wire (when knot) pass throught alarm device system, stop after about six
If you didn't find the product information you want above, you can search more
Product information through here. We are dedicated to provide you more
Trade Leads. Anyway, thanks again for your kind patronage!
English
German
Spanish
French
Italian
Portuguese
Japanese
Korean
Arabic
Russian
Chinese
