Intermediate Wire Drawing Machine

1.Model of Intermediate Wire Drawing Machine:
INTERMEDIATE WIRE DRAWING MACHINE(L-17MDT)
.Main technical data of Intermediate Wire Drawing Machine:
2.1 Application: process copper wire to small size
2.2 Type: four-shaft horizontal type
2.3 Size of inlet: φ2.1mm-φ3.2mm
2.4 Size of outlet: φ0.4mm-φ1.2mm
2.5 Highest machine speed: 1200m/min
2.6 Speed of Outlet wire:(nly for reference)
0.4-1.6mm 800-1200m/min
2.7 Max. Quantity of drawing die: 17 (prepared by buyer)
2.8 Size of drawing die: φ30mm x 15mmT or φ25mm x 10mmT
2.9 Area reduction of wire drawing:
Die No.1-16: 15%
Die No.17: 10.5%
2..10 Lubrication type of wire drawing: total soak type
2.11 Oil requirement of wire drawing: 100 liter/min
2.12 Power of main machine: 45KW
2.13 Power of coiling: 11KW
2.14 Pay-off: paid off by 90W motor with utmost detecting switch
2.15 Safe door: lift type
3. Component of Intermediate Wire Drawing Machine:
3.1 Main machine of wire drawing 1 set
3.2 Shaftless coiling machine 1 set
3.3 Pay-off stand 1 set
3.4 Operating desk 1 set
3.5 Electric control cabin 1 set
4.Content of Intermediate Wire Drawing Machine
4.1 Main machine of Intermediate Wire Drawing Machine
4.1.1 Cast iron incorporate casting machine.
4.1.2 Driving type: droved by gear
4.1.3 Capstan
4.1.3.1 Four tiers and two bodies
4.1.3.2 Four capstans, four capstans can be changed with same specification. Final capstan should be unaided specification
4.1.3.3 Tungsten carbide is sprayed on surface of capstan
4.1.3.4 Driving type: drove by gear
4.1.4 Oil pipe of wire drawing:
4.1.4.1 Inlet of oil pipe PT-1 1/4 with spherical valve.
4.1.4.2 Underside of die should be cooling and lubricated. When working, capstan should be dipped in liquid of wire drawing, so that it can improve cooling
4.1.5 Outgoing of wire:
4.1.5.1 Blanket seat of outgoing
4.1.5.2 Capstan of outgoing
4.1.5.3 Meter measure
4.1.6 Mechanism lubricate
4.1.6.1 Dipping circle and spray type, seller supply sprocket wheel and axletree
4.1.6.2 There is measure for capacity of oil in machine case
4.1.7 Main motor:
4.1.7.1 45KW 4P 380V 50HZ inductive motor
4.2 Shaftless coiling machine
4.2.1 Type: swing arm
4.2.2 Precision:
-10KG, tension is regulated by automatic pressure regulating valve
4.2.3 Air pressure: 4-6kg/cm
4.2.4 Motor: 15KW, 4P 380V 50HZ inductive motor
4.2.5 Max. Loading capacity of copper: 300kg
4.2.6 Bobbin: φ630mm
4.2.7 Brake: Electromagnetic brake
4.2.8 Transmission: Transmission triangular strap
4.2.9 Safety cover: Coiling spool is close type. There is one
window for check.
4.3 Operating box
4.3.1 Zero push-button of counter
4.3.2 Emergency stop button
4.3.3 Control power ON/OFF optional switch
4.3.4 Automatic/ by hand
4.3.5 Running/stop button
4.4 ZL-57KVA type Anneal machine
4.4.1 Application:
This machine is the corollary equipment (which is optional) of ZL-17MDT.
4.4.2 Main technical data
4.4.2.1 Wire size: φ0.4mm-φ1.2mm
4.4.2.2 Trolley speed: 600-1000
4.4.2.3 The way of anneal: DC
4.4.2.4 Maximum output power: 57KVA
4.4.2.5 Maximum anneal current: 1200A
4.4.2.6 Transmission type: gear
4.4.2.7 Dynamic source: main engine
4.4.2.7 Maximum anneal voltage: 50V
4.5 Electrical control box
4.5.1 Power switch
4.5.2 AC Motor and transducer control system
4.5.3 Disorder line and line disconnection control
4.5.4 Coiling machine to pay off and brake control
4.5.5 Electrical parts, first line in both here and abroad
4.6 Spare parts
4.6.1 Pedal switch 1pc
4.6.2 Crash pad 12pcs
4.6.3 Protective tube  3pcs
4.6.4 User's manual 1pc
4.7Documents
4.7.1Equipment foundation drawing
4.7.2Electrical principle drawing
4.7.3 Directory and guideline
4.8Main accessory part
4.8.1 The drawing capstan and fix speed capstan are sprayed carbonized tungsten on the surface
4.8.2Main motor of drawing, motor of take-up are from Wan Nan of China
4.8.3 The bearing is NSK of Japan; some low-voltage electrical elements are made by SCHNEIDER
4.8.4 The guide wheel is sprayed with pottery
4.8.5 The transmission belt is Britain brand
5. Instructing installation and commissioning
Seller will dispatch technicians for instructing installation and commissioning and buyer should arrange and make installation and commissioning.
a) Technicians: 2 persons
b) Duration: 10-15 days
c) Treatment:
1). All the expense of technicians such as go-and-come flight ticket, traffic fee, dormitory charge, food and insurance charge should be at Buyer' account.
2). The allowance for Technicians should be paid not less than USD50 per day each person. The duration should be counted from landing date. And our engineer has one-day holiday per week.
d) Seller will not charge installation and commissioning fee.
e) Buyer should be in charge of technicians'visa and pay the charge of visa. Seller will assist buyer to deal with all the correlative work for technicians'isa in China.
f) Buyer should hire an interpreter for translation between Chinese technicians and their worker.
g) Buyer should prepare all the equipment and machinery, material for installation and commissioning. The charge of regulation, labour and interpreter should be on buyer' account.
Shanghai Lishang International Trading Co.,Ltd. is a professional international trade company in China. We are a subsidiary company of Shanghai Pudong Lisheng Electrical Machinery Co.,Ltd which is a leading electrician's machinery manufacturer with 20 years production experience in China. Lisheng' main products includes Upward continuous casting system, Continuous casting and rolling system for copper rod production and Copper cathode producing line, etc. High quality combined with good service support after sales provide exceptional performance for Lishang' customers and business partners.